RICOH AF1113 angled copies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ericacah
    Technician
    • Jun 2011
    • 12

    #1

    RICOH AF1113 angled copies

    copies are misaligned appears to be at an 5 degrees angle
  • infsergey
    Technician
    • Apr 2011
    • 14

    #2
    and from the glass and the ADF?

    Comment

    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900

      #3
      Or is just copying or printing from a computer or memory. For instance, printing a counter sheet, is it skewed then?
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

      Comment

      • ericacah
        Technician
        • Jun 2011
        • 12

        #4
        Originally posted by Jomama46
        Or is just copying or printing from a computer or memory. For instance, printing a counter sheet, is it skewed then?
        feeding from memory or manual just the same output, it seems rotated

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838

          #5
          This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals | The Internet's largest selection of manuals | Instant Downloads

          Paul@justmanuals.com

          Comment

          • infsergey
            Technician
            • Apr 2011
            • 14

            #6
            check the pressure roller registration, sometimes broken seat spring mounting front bushing

            Comment

            • Eric1968
              Service Manager

              1,000+ Posts
              • Jan 2009
              • 2458

              #7
              x2 for the Front Registration Bushing. When it breaks the registration rollers (the rubber one and the steel one) are not aligned anymore.

              Comment

              • ericacah
                Technician
                • Jun 2011
                • 12

                #8
                Originally posted by infsergey
                check the pressure roller registration, sometimes broken seat spring mounting front bushing
                Originally posted by Eric1968
                x2 for the Front Registration Bushing. When it breaks the registration rollers (the rubber one and the steel one) are not aligned anymore.
                thnx...ur right the seat of the spring is broken..
                Last edited by ericacah; 06-25-2011, 12:39 PM.

                Comment

                Working...