Jamming coming out of the exit even with a straight through no duplex in play. Original on the glass with any tray it just stops after the exit switch. Replaced the exit roller checked the sensors at the exit with inputs on/off ok. Removed the finisher and disconnected adf to test but same thing. Paper does not crash it just stops. I can get 20/50/100 copies through its sporatic. Help appreciated thanks t.
-
-
Re: mp 7500
What is the jam code?sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+ -
Re: mp 7500
maybe it is a malfunctioning sensor on the exit. it is better to replace it.Nobody is perfect..Comment
-
Re: mp 7500
Might also be the fuser slowing down due to dirty oil rollers. Or fuser exit sensor. We need a code.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
Comment