[Misc] Ricoh MP2500

[Guest]

We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.

[copyaction]

Re: Ricoh MP2500

HDD

[ucinn]

Re: Ricoh MP2500

HDD

If you know the IP address, try connecting to it through the web service. Then you might be able to see what code it is throwing at you.

[JustManuals]

Re: Ricoh MP2500

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[sharpmind]

Re: Ricoh MP2500

We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.

I have encountered the same problem. What I did first was I swapped the whole operation panel to check if it is good or not.I found out that there was nothing wrong in the operation panel.

I have rectified the problem by replacing the BICU board and the polygon motor at the same time.Proven and tested!

[mikadonovan]

Re: Ricoh MP2500

We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.

These models had a problem with the LCDC going non responsive, but I've not seen a blank one yet. Have you tried another op panel?

[copiermen]

Re: Ricoh MP2500

We have tried new control panel, no joy, unfortunately have no idea what the IP address is. So looks like polygon motor and BICU board next. Thanks for all your help. Will let you know how we get on.

[harwin84]

get the IP address from your printer driver

[mabawser]

Re: Ricoh MP2500

had this and when looked it has a sc204 code if i remember right and the poloygon mirror motor was causing this!!

[copiermen]

Re: Ricoh MP2500

had this and when looked it has a sc204 code if i remember right and the poloygon mirror motor was causing this!!

Thanks for that, have ordered polygon and BCIU, will hopefully sort problem.

[mustdie]

Re: Ricoh MP2500

I have encountered the same problem. What I did first was I swapped the whole operation panel to check if it is good or not.I found out that there was nothing wrong in the operation panel.

I have rectified the problem by replacing the BICU board and the polygon motor at the same time.Proven and tested!

I have rectified the problem by replacing the BICU board ...settle

[limo]

Re: Ricoh MP2500

By replacing the BICU sometimes you an fixed the m/c temporarily . The real cause of the problem is the damaged duplex harness which are grounded and damage the BICU.