mpc4500 jam 56 registration off in adf

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Masterchief
    replied
    Re: mpc4500 jam 56 registration off in adf

    If the white torque limiter roller with the one way bearing is cracked it will cause slipping and jams, also the friction pads can be problematic also and these are worth changing

    Leave a comment:


  • NeoMatrix
    replied
    Re: mpc4500 jam 56 registration off in adf

    :: Better than a slap with a wet fish. ::

    J53 ERRORS for ADF 3030
    Replace Parts :
    A294-6700 Sep Clutch.
    D541-2241 Sep Roller
    AX21-0102 Pickup Mag Clutch
    AW02-0141 Input Photo Interrupter.
    B789-2114 Feed Belt Roller Oneway Clutch
    D541-2121 Feed Belt

    Leave a comment:


  • NeoMatrix
    replied
    Re: mpc4500 jam 56 registration off in adf

    Originally posted by Llama God
    Check that the transport rollers just past the feed belt aren't spinning on their shaft. There are 3 of them, 2 thin ones and a thicker one, and the thicker one comes loose with time.
    Thanks Lama I have a dynamic fault problem child MPC3300 ADF at the moment I will check the rego roller and shafts next trip.

    Leave a comment:


  • NeoMatrix
    replied
    Re: mpc4500 jam 56 registration off in adf

    Attach the first page of the SMC report.
    SP 5990-4.
    I would be interested to know what the skew sensor count is logging.
    It may be a simple case of cleaning the original input sensor.

    HTH

    Leave a comment:


  • Moza
    replied
    Check if the ADF has a black sticky pad on the blue guide, they were sometimes missed off causing j56

    Leave a comment:


  • Llama God
    replied
    Re: mpc4500 jam 56 registration off in adf

    Check that the transport rollers just past the feed belt aren't spinning on their shaft. There are 3 of them, 2 thin ones and a thicker one, and the thicker one comes loose with time.

    Leave a comment:


  • COPIERMAN
    replied
    Re: mpc4500 jam 56 registration off in adf

    Try cleaning adf registration sensor area could be false jams. If trying to feed paper then jams you should look for mechanical problem or sensor issues.

    Leave a comment:


  • mrfuser
    started a topic mpc4500 jam 56 registration off in adf

    mpc4500 jam 56 registration off in adf

    Anyone seen this jam 56 in feeder?

    Thanks
    Kelly
Working...