3224C Overheating without error code

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Masterchief
    replied
    Re: 3224C Overheating without error code

    Originally posted by tcs04
    (Stating the obvious?)... If the thermistors are bent / dirty, they will register a lower temperature than the actual temp and the machine will run hot.... until the thermostats blow!... (Smack them against the wall if they do.. ! )
    My answer would be the same, common problem with overheating in some models.

    Leave a comment:


  • femaster
    replied
    Re: 3224C Overheating without error code

    Originally posted by Bantams
    It Could be that the cooling fan isn't working it's located behind a small grill towards the rear of the left hand cover near the fuser door.
    I believe there is also a cheap washable "filter" under the cover for that fan also. If the copier is in a dirty environment, it could be plugged.

    Leave a comment:


  • tcs04
    replied
    Re: 3224C Overheating without error code


    (Stating the obvious?)... If the thermistors are bent / dirty, they will register a lower temperature than the actual temp and the machine will run hot.... until the thermostats blow!... (Smack them against the wall if they do.. ! )

    Leave a comment:


  • Bantams
    replied
    Re: 3224C Overheating without error code

    It Could be that the cooling fan isn't working it's located behind a small grill towards the rear of the left hand cover near the fuser door.

    Leave a comment:


  • mrwho
    started a topic [Misc] 3224C Overheating without error code

    3224C Overheating without error code

Working...