SC 990 Solución de por vida
Collapse
X
-
-
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
blackcat4866 dejo mas detalles ok
you are right blackcat4866 left more details ok
Solución Final a CS 990 Aficio 1035_001.jpg1) turn off the copier, 2) open the front cover, 3) withdraw the brown cover (2 screws) and disconnect the mechanical counter, 4) withdraw the metal plate (2 screws) covering the LD, 5) and can see LD unit okComment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
-
Re: SC 990 Solution for Life
Good evening. Have you had problems with changing the laser VR setting on this family of machines? Do you have any questions? Perhaps you are getting SC990 codes on the MP family of machines? Or perhaps you are having problems with the processors on the MP family of machines?
That's my best interpretation.
For those interested, I believe roman2304 seeks a make a similar laser intensity adjustment on the MP-5000/4000 and MP-5500/6000/7000. He expects it to be a simulation or service mode, not a VR adjustment (which makes perfect sense).
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Hi all, good for all those who have had problems with Ricoh copiers suggesting 1035-45-2035-45 which gives error SC990 (Procom) (clear this that is for damages of the cylinder), solution is very easy, only is to modify the unit LD VR, bajan a degree to LD unit VR101 and ready can even continue using cylinders that soon gave problems SC990I discovered trying to solve a SC 322 326 and me di account that did not already SC990, my definition is that the laser beam hits too strong to the cylinder and when this bare ends makes short and error Sc990 is generated.
Well anyway to my have worked me in many Copier Ricoh 2035-1035Comment
Comment