ricoh aficio 3235c color registration

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copiers89
    • Jun 2025
    #1

    [CQ] ricoh aficio 3235c color registration

    20130617100355278.pdf this is the sample any help to adjust reg color the mach couldnt automatic
    Tags: None
    • ruben
      The New Guy

      1,000+ Posts
      • Oct 2012
      • 1203
      #2
      Re: ricoh aficio 3235c color registration

      Please read the user manual:

      http://support.ricoh.com/bb_v1oi/pub...0/B1807540.pdf (page 134, actual page 146)

        Comment

        • johnyb
          Trusted Tech

          100+ Posts
          • Feb 2011
          • 167
          #3
          Re: ricoh aficio 3235c color registration

          If you are a Engineer...To start with....

          • Clean ID sensors.
          • Clean the silver roller on the transfer facing the ID's.
          • Attempt colour reg adjustment.
          • New belt required.
          • Weak colour on a dev unit.
          • The list goes on!





          If you are a customer phone an Engineer.

          PS

          Can be a nightmare when you get this fault on these machines.

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: ricoh aficio 3235c color registration

              This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


              Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


              Paul@justmanuals.com

                Comment

                • logrady2331
                  Trusted Tech

                  250+ Posts
                  • Feb 2011
                  • 301
                  #5
                  Re: ricoh aficio 3235c color registration

                  As stated, this problem can be a nightmare - mostly from a cost perspective. If the machine will not do an automatic registration adjustment you will need to follow the service manual and do the "raw" adjustments IN ORDER. You will need a loop. If you don't have one you are wasting your time trying to bring the laser in to rough adjustment. You could have bad developing units, drum inuits, t-belt assembly, the list goes on and on. This problem will really test your knowledge of the copy process. I have seen everyting from bad LSU to dirty ID sensors/transfer rollers all the way to a bad NV RAM. Make sure you have good dev. and drum units, clean ID sensors, good t-belt, etc. IF all that is good do an NV RAM clear and reload the bible settings. If it still fails, make it a parts machine and buy one from any of the wholesalers as they sell these models for around five hundred dollars.

                    Comment

                    • bat
                      Trusted Tech

                      100+ Posts
                      • Sep 2008
                      • 140
                      #6
                      Re: ricoh aficio 3235c color registration

                      Had a same problem on Aficio 3260c, this problem can be a nightmare, I replaced all boards, all motors, PCUs, connectors, everything except Laser Unit. After few months of work I replaced a ITB connectors on chassis, machine is working for two weeks now without color shift, so this might be a solution to this problem... good luck

                        Comment

                        Previous template Next
                        Working...