MPC 2500 Toner Problem

[gestetner tech]

Re: MPC 2500 Toner Problem

Put some toner manual into the devbox by a spone or something, if that works the problem is not the dev box.
Check the part where rubber hose fits on the toner end sensor remove it and clean..
BTw do you use orginal toner?
I have seen machines get waco with nonorginal toner and i had to replace ROM where pixelcount takes place.

[CableGuy]

Re: MPC 2500 Toner Problem

I had a mpc3500 on Friday. Changed yellow pump/pipe, no go... cleaned the sensor that sees the toner coming out of the bottle, no go. These are usually the two that sort it. This time I had to remove the elbow that opens the toner bottle and pipe attaches too and vac it out, then the bugger worked, that was a first for me.
Have you cleaned that sensor and the clear bits where the sensor looks through?