[Error Code] Lanier LD370 Fuser Web

[dgrow]

Hello All,
I have replaced a fuser web in a Lanier LD370 but the "replace fuser web" message keeps popping up. I am able to clear it temporarily but uit returns a short time later. I enter service mode and go into 1) Feed and clear the counter for web motor. The machine comes to ready and works for a while but then the message returns. Does anyone have any suggestions for me?
Thanks

[ruben]

Re: Lanier LD370 Fuser Web

Make sure you have positioned the web end sensor correctly.

mp7001-web.jpg

[kyrenecopy]

Re: Lanier LD370 Fuser Web

Make sure you have positioned the web end sensor correctly.

[ATTACH=CONFIG]21643[/ATTACH]

And make sure the acuator is not broke off or bent from heat. Reset the web counter, not the web motor!