mpc6000 color fading

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • digicor
    Service Manager

    1,000+ Posts
    • Jul 2008
    • 1136
    #1

    mpc6000 color fading

    I have a big problem here, the color is still fading out after all dv changes, drum,bld,extera, all procedures were followed by the book on the re install, all dv fed into the units from the bottles,
    please any help or hints would be great..
    thank you
    Tags: book, color, drum, install, mpc, mpc6000, stall, units
    • digicor
      Service Manager

      1,000+ Posts
      • Jul 2008
      • 1136
      #2
      Re: mpc6000 color fading

      force toner tones it up for about a week.. by the way

        Comment

        • TonerMunkeh
          Professional Moron

          2,500+ Posts
          • Apr 2008
          • 3873
          #3
          Re: mpc6000 color fading

          Wow, you're really on shitbox here aren't you! Right. What have you actually done to the machine so far, not including the developers being replaced?
          It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

          Hit it.

            Comment

            • digicor
              Service Manager

              1,000+ Posts
              • Jul 2008
              • 1136
              #4
              Re: mpc6000 color fading

              i replaced the drums,blds, brushes, in all drums, also.
              i just got back from client
              1) all the image density check's were at 4? when i left the machine after all the procedures they were at 1.
              i ran id init again(3801) on all colors one at a time after toning the machine back up, all are on 1 again.
              what is exactly 2805? again this machine does not have 2805 i have 2806, it on -32ua this is default.
              could the itb be the cause of the fading? is there a voltage or density adj for this?
              thanks

                Comment

                • seeb
                  Technician

                  Site Contributor
                  • Nov 2009
                  • 41
                  #5
                  Re: mpc6000 color fading

                  Check SP 3301 1-4 is set to one. I had a 6501 that was set to 0 on black only and black would crap out after a week or so.

                    Comment

                    Previous template Next
                    Working...