mpc6000 color fading

[seeb]

Re: mpc6000 color fading

Check SP 3301 1-4 is set to one. I had a 6501 that was set to 0 on black only and black would crap out after a week or so.

[digicor]

Re: mpc6000 color fading

i replaced the drums,blds, brushes, in all drums, also.
i just got back from client
1) all the image density check's were at 4? when i left the machine after all the procedures they were at 1.
i ran id init again(3801) on all colors one at a time after toning the machine back up, all are on 1 again.
what is exactly 2805? again this machine does not have 2805 i have 2806, it on -32ua this is default.
could the itb be the cause of the fading? is there a voltage or density adj for this?
thanks

[TonerMunkeh]

Re: mpc6000 color fading

Wow, you're really on shitbox here aren't you! Right. What have you actually done to the machine so far, not including the developers being replaced?

[digicor]

Re: mpc6000 color fading

force toner tones it up for about a week.. by the way

[digicor]

I have a big problem here, the color is still fading out after all dv changes, drum,bld,extera, all procedures were followed by the book on the re install, all dv fed into the units from the bottles,
please any help or hints would be great..
thank you