RICOH AF1035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • +ve charge
    Technician

    50+ Posts
    • May 2008
    • 87

    #1

    [CQ] RICOH AF1035

    Hi There... First allow me to wish you all an Extremely Happy and Productive New Year, My wishes also go out to the administrator and all those involved with the excellent work done here.

    Can someone pls help me with a copy quality problem on the Ricoh AF1035 Copier as seen in the attachment.

    Thank You
    Attached Files
  • Bantams
    Senior Tech

    500+ Posts
    • Jun 2012
    • 603

    #2
    Re: RICOH AF1035

    Dirty Charge roller in the PCU section.

    Comment

    • collme
      Ricoh tech

      Site Contributor
      100+ Posts
      • Apr 2010
      • 221

      #3
      Re: RICOH AF1035

      Originally posted by Bantams
      Dirty Charge roller in the PCU section.
      times 2

      Comment

      • slimslob
        Retired

        Site Contributor
        25,000+ Posts
        • May 2013
        • 37072

        #4
        Re: RICOH AF1035

        Originally posted by Bantams
        Dirty Charge roller in the PCU section.
        make that 3

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22973

          #5
          Re: RICOH AF1035

          Turn this one over to sales. These machines were toner pigs. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          • WWW
            Technician
            • Nov 2013
            • 12

            #6
            Re: RICOH AF1035

            Yes to the dirty charge roller. But why?

            What I have found to usually be the cause is in the waste coil section of the pcu. Well, it's not really a coil, more like a bar with mylars attached to it. What happens is the mylar starts to come off at the ends which causes the bar to stop turning because the mylar catches against the frame of the waste removal area. Waste toner then backs up into the drum section which gets on the drum and charge roller.

            If the loose ends of the mylar aren't too bad, you can trim off the corners of the mylar to return the waste removal bar to proper operation. This is only a short to mid-term solution, depending on copy volume, as more of the mylar will eventually come loose. Find a good used pcu and swap it out.

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838

              #7
              Re: RICOH AF1035

              This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:





              Paul@justmanuals.com

              Comment

              Working...