Charge Roller

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jonbonse
    Senior Tech

    Site Contributor
    500+ Posts
    • Jun 2009
    • 730

    #16
    Re: Charge Roller

    Originally posted by logrady2331
    You don't need to replace them at all. At set up we remove the charge rollers and apply Meguire's cleaner wax. Apply it just like you were waxing your car. (Aplly with a clean, soft cotton towel or wipe, buff the residual wax off and away you go). By doing this we routinely get 160 to 180k out of our PCU's. The charge roller will outlast the blade and drum by doing this little trick. N/A Trading mekas up a bottle chrage roller cleaner for IKON but you can get it by ordering 50.00 or more from them. You have to call and ask for it but they will sell it. It's pretty much just like Meguires cleaner wax in the red bottle. It works on all charge rollers.
    hi

    is it the Meguiars liquid polish or the wax paste to polish the charge roller?

    thanks

    Comment

    • logrady2331
      Trusted Tech

      250+ Posts
      • Feb 2011
      • 301

      #17
      Re: Charge Roller

      It's the liquid in a red bottle. As stated here, put paper between the charge roller and cleaning brush so you don't get polich/cleaner on the brush. Nu Finish works liek a champ, too.

      Comment

      Working...