Ricoh MP 2551 SC 553 Error code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935

    #31
    Re: Ricoh MP 2551 SC 553 Error code

    Originally posted by Lagonda
    Oh dear, oh dear, it looks like some people need to sit on the naughty chair for awhile, if you can't play nicely together........

    Now to get back to your original problem, are you sure every thing is plugged into the PSU? I would suspect that the triacs are turning the lamps on but there is no feed back to the temp control circuit.
    I just got the copier running. You suspected right. The control wire for the temp control circut was (kinda) buried in a wire harness and the male connection was in the upper right hand corner of the board. Thanks so much for your feedback again !!!

    Comment

    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37377

      #32
      Re: Ricoh MP 2551 SC 553 Error code

      Originally posted by Doug James
      I just got the copier running. You suspected right. The control wire for the temp control circut was (kinda) buried in a wire harness and the male connection was in the upper right hand corner of the board. Thanks so much for your feedback again !!!
      And thank you for letting us know what the problem was and that it is corrected.

      Comment

      • Lagonda
        Service Manager

        Site Contributor
        1,000+ Posts
        • Aug 2008
        • 1649

        #33
        Re: Ricoh MP 2551 SC 553 Error code

        Happy to help
        And happy to do it without a lot of personal invective. I hope that B Bishop had an early night and got out of the right side of the bed today
        At least 50% of IT is a solution looking for a problem.

        Comment

        • Doug James
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2012
          • 935

          #34
          Re: Ricoh MP 2551 SC 553 Error code

          Originally posted by Lagonda
          Happy to help
          And happy to do it without a lot of personal invective. I hope that B Bishop had an early night and got out of the right side of the bed today
          Same here...

          Comment

          Working...