ricoh 2051 print repeating

[Elmo]

Re: ricoh 2051 print repeating

check the fusing unit if you are not a tech call one this is not a user job

[fbkhan3]

Re: ricoh 2051 print repeating

Ricoh 2051 is the model print and copies are getting duplicated towards the end of the page

If i'm not mistaken this should be Ricoh MPC2051..is it??

Well if you can rub off the image from paper as you said then it's definitely a Poor Fusing Issue specially the Pressure Release Locks on both sides in the Fusing Units.Make sure one of them isn't broken..



locks.JPG

HTH
Regards

[mikadonovan]

Re: ricoh 2051 print repeating

You need to check your paper type in the print driver settings as well as checking the fuser.

[fshead]

Re: ricoh 2051 print repeating

sir
what is the solution ..?

you need a new "defizzler unit"

[CRISTIAN MULLER]

Re: ricoh 2051 print repeating

try print with thick paper selected on driver, don't forget to change in copier too.

[ramana2323]

Re: ricoh 2051 print repeating

If i'm not mistaken this should be Ricoh MPC2051..is it??

Well if you can rub off the image from paper as you said then it's definitely a Poor Fusing Issue specially the Pressure Release Locks on both sides in the Fusing Units.Make sure one of them isn't broken..



[ATTACH=CONFIG]26371[/ATTACH]

HTH
Regards

sir

Is there anything in the Printer to be adjusted like fusing temperature at he beginning of the paper and the end of the paper
as you can see the images attached the image is getting fused properly for nearly 80% of the sheet of any microns
only the last 20% is getting scattered
the Pressure Release Locks are fine I have checked them
thanking you

[slimslob]

Re: ricoh 2051 print repeating

My guess would be that temperature of the pressure roller dropping during copying. Check for an open pressure roller thermostat or the pressure roller thermistor loose or out of position.

[fbkhan3]

Re: ricoh 2051 print repeating

sir

Is there anything in the Printer to be adjusted like fusing temperature at he beginning of the paper and the end of the paper
as you can see the images attached the image is getting fused properly for nearly 80% of the sheet of any microns
only the last 20% is getting scattered
the Pressure Release Locks are fine I have checked them
thanking you

There are 100 of SP settings related to Fusing temperature but it's never a good idea to play around.
Service manual has it all and you need to read through the FSM before attempting those settings.

Are you using OEM or Original Ricoh Toners?


Regards.!

[ramana2323]

Re: ricoh 2051 print repeating

There are 100 of SP settings related to Fusing temperature but it's never a good idea to play around.
Service manual has it all and you need to read through the FSM before attempting those settings.

Are you using OEM or Original Ricoh Toners?


Regards.!

sir
I am using original ricoh toners only
thanking you

[fbkhan3]

Re: ricoh 2051 print repeating

Instead of playing around with Fusing temperature just try to change the paper type to Thick 1 or Thick 2 that will reduced the Machine speed but let's see if that makes any difference?




Regard's

[fshead]

Re: ricoh 2051 print repeating

Is there anything in the Printer to be adjusted like fusing temperature at he beginning of the paper and the end of the paper>>

a tec would never ask that question..
this is a end user trying to avoid paying for a service call.
plus it would good idea to know what model machine as i cant see a b/w 2051 wth 9k

[slimslob]

Re: ricoh 2051 print repeating

Is there anything in the Printer to be adjusted like fusing temperature at he beginning of the paper and the end of the paper>>

a tec would never ask that question..
this is a end user trying to avoid paying for a service call.
plus it would good idea to know what model machine as i cant see a b/w 2051 wth 9k

I agree the original poster must be an end user or an IT person. The machine is a MP C2051, the attachment to post 4 is in color.

[fshead]

Re: ricoh 2051 print repeating

I agree the original poster must be an end user or an IT person. The machine is a MP C2051, the attachment to post 4 is in color.

i like others here will at times help those non tec if it there is a level of real need..ie a non profit or such...
here we have someone who can afford to buy a new machine but not the service call...?????
time to reach inside your pockets..make the call, write the check..
we all cant be astronauts

[ramana2323]

Re: ricoh 2051 print repeating

i like others here will at times help those non tec if it there is a level of real need..ie a non profit or such...
here we have someone who can afford to buy a new machine but not the service call...?????
time to reach inside your pockets..make the call, write the check..
we all cant be astronauts

Sir
by the way you Respond and Address the problem
Everybody here in the forum can understand that you don't have proper knowledge about the machines

Rather you are More concerned about the A person's pockets instead of Addressing the Problem
You are commenting whether Can he buy a new Machine or Can he Afford to pay for A Service Call

If you are unaware of the problem simply Keep Silent
Sometimes Even a Senior Service Engineer Cannot solve the Issue.......PL note that
Thanking you

[fshead]

Re: ricoh 2051 print repeating

Sir
by the way you Respond and Address the problem
Everybody here in the forum can understand that you don't have proper knowledge about the machines

Rather you are More concerned about the A person's pockets instead of Addressing the Problem
You are commenting whether Can he buy a new Machine or Can he Afford to pay for A Service Call

If you are unaware of the problem simply Keep Silent
Sometimes Even a Senior Service Engineer Cannot solve the Issue.......PL note that
Thanking you

Everybody here in the forum can understand that you don't have proper knowledge about the machines

yes as you cant even post which machine "ricoh 2051"you are asking for "free" tech support..or
even post a proper copy of your issue..

you are like the guy who comes to dinner empty handed and afterwards complains that the food sucked..now where is my dessert???
you are NOT a tech,you bring nothing.you have a new ish machine that normally should be under warranty\
"unless you bought it off the back of a truck",that doesnt work as it should.
.if you stated you have no clue on copier function or
such i d be inclined to respond differently but instead you dance around expecting me to read your mind..

RHAMEN I am done with you and i dont have proper knowledge about the machines..
hire a tech you cheapo...............