MPC5503 view fuser temp SP mode

[copier tech]

Quick question if someone knows! long sorry but I'd like to view the fuser temperature while the machine is running & at idle, what's the SP mode for this please?, I have been searching the service manual but can't seem to see it!

[slimslob]

Re: MPC5503 view fuser temp SP mode

Since you have the Service Manual, look in:
D146/D147/D148/D149/D150 SYSTEM MAINTENANCE SECTION

SP MODE TABLES

MAIN SP TABLES-1

Page 2-43.

[turbojetboy]

Re: MPC5503 view fuser temp SP mode

Quick question if someone knows! long sorry but I'd like to view the fuser temperature while the machine is running & at idle, what's the SP mode for this please?, I have been searching the service manual but can't seem to see it!

Be aware that there has been firmware updates to correct the issue of unwarranted fuser sc errors. You need to make sure all xx03 models are all up to date with latest firmware. Many of these where popping fuser sc codes every few days, so they had to address it.

[slimslob]

Re: MPC5503 view fuser temp SP mode

Be aware that there has been firmware updates to correct the issue of unwarranted fuser sc errors. You need to make sure all xx03 models are all up to date with latest firmware. Many of these where popping fuser sc codes every few days, so they had to address it.

I downloaded today. A number of the update were dated as being released today.

[copier tech]

Re: MPC5503 view fuser temp SP mode

The reason I wanted to know, believe it or not, got a call that the customer is burning her hand on the copy paper on exit! so just wanted to show her the fuser temps & explain this is perfectly normal, & that if the machine was to over heat/get to hot it will show an error & shut down.