[Misc] MPC3503 broken part

[copier tech]

Could someone pls help me identify this broken part, customer has somehow broken the gear AND shaft from the rear of the right door, it's the duplex drive idl gear.

I have found the gear in the parts manual but need to order the medal plate that has the shaft on it, doesn't seem to be listed.

Customers AAggghhhhhhhhhh!!!!

gear.jpg

[Bantams]

Re: MPC3503 broken part

Probably comes welded onto the metal plate in the picture

[Polarbear]

Re: MPC3503 broken part

If it isn't in the parts manual, you are going to have to find an engineering shop to help you out....

[Gift]

Re: MPC3503 broken part

D1494648
bracket:swivel

d1494653
tension spring:
Swivel

d1494652
gearulley:swi
vel

[copier tech]

Re: MPC3503 broken part

It's the metal plate I need with the shaft weilded on, might have to order the complete door!

[Debs1964]

Re: MPC3503 broken part

I replaced a whole duplex unit last week because the spot weld was broken on the shaft, I've put the old one in my garage for spare parts, looks like this could prove to be a common problem

[Polarbear]

I am sure with a little bit of work one should be able to repair the part in question rather than junk a whole duplex?

[copier tech]

Re: MPC3503 broken part

I do wonder how they break off!?
Can I ask what part number you ordered?

Thanks

[Debs1964]

Re: MPC3503 broken part

I do wonder how they break off!?
Can I ask what part number you ordered?

Thanks

I fitted a D1494830 to an MPC6003

[pocket aces]

Re: MPC3503 broken part

Could someone pls help me identify this broken part, customer has somehow broken the gear AND shaft from the rear of the right door, it's the duplex drive idl gear.

I have found the gear in the parts manual but need to order the medal plate that has the shaft on it, doesn't seem to be listed.

Customers AAggghhhhhhhhhh!!!!

[ATTACH=CONFIG]26620[/ATTACH]

Try this part # D1494750 Bracket motor Duplex

[copier tech]

Re: MPC3503 broken part

Just looked at the updated parts manual, maybe this could be it!????


aaaaaa.jpg

[Gift]

Re: MPC3503 broken part

I'd say that's a good pick!