mpc7500 FUNCTIONAL PROBLEM

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • digicor
    Service Manager

    1,000+ Posts
    • Jul 2008
    • 1153
    #1

    mpc7500 FUNCTIONAL PROBLEM

    Does anyone know what causes the "functional problems with the machine reboot after" progress bars... The client was making copies got to 100, then this,
    hdd? Memory dimms?
    Tags: None
    • nmfaxman
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1702
      #2
      Re: mpc7500 FUNCTIONAL PROBLEM

      Backup Address book and reformat hard drive.

      it could be corrupted.
      Why do they call it common sense?

      If it were common, wouldn't everyone have it?

        Comment

        • digicor
          Service Manager

          1,000+ Posts
          • Jul 2008
          • 1153
          #3
          Re: mpc7500 FUNCTIONAL PROBLEM

          COOL,THNX

            Comment

            • mikedci
              Trusted Tech

              100+ Posts
              • Jul 2010
              • 227
              #4
              Re: mpc7500 FUNCTIONAL PROBLEM

              Check the sc history? We recently had a bad sensor (sc373) causing the functional problem restart issue.

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37360
                  #5
                  Re: mpc7500 FUNCTIONAL PROBLEM

                  There is a SP setting for Auto Reboot on error. Change it so that it displays the Sc in stead of rebooting.

                    Comment

                    • slimslob
                      Retired

                      Site Contributor
                      25,000+ Posts
                      • May 2013
                      • 37360
                      #6
                      Re: mpc7500 FUNCTIONAL PROBLEM

                      I got a little more time right now so I looked up the setting. SP 5875 SC Auto Reboot. Set SP 5875-001 to 1.

                        Comment

                        • turbojetboy
                          Trusted Tech

                          250+ Posts
                          • Aug 2009
                          • 279
                          #7
                          Re: mpc7500 FUNCTIONAL PROBLEM

                          Originally posted by digicor
                          Does anyone know what causes the "functional problems with the machine reboot after" progress bars... The client was making copies got to 100, then this,
                          hdd? Memory dimms?
                          I think you will find that you thoroughly need to clean out the itb assy, maybe replace the belt and make sure all belt and id sensors are spotless.

                            Comment

                            Previous template Next
                            Working...