Ricoh Pro c720

[slimslob]

Re: Ricoh Pro c720

im not saying that but trying to search online everyone says they dont work on the C720 so i aint sick just looking for some assistance!!!

Ricoh Production Printing Support 1-877-318-8968

[imaginemoko]

Re: Ricoh Pro c720

try to check Sir PSU EA2 - FU3 (facing back side remove the lower right cover the board in the middle) and PSU G - FU2 (facing the back side the board at right underneath of AC Driver Board you can see this boards after you swing the lower right window) both 4A but be more extra carefull when removing this board bracket some connector dont have slack.

but still its a best to have a trained ricoh engineer look it for you Sir, Good Luck
but still it

[jc1print]

Re: Ricoh Pro c720

try to check Sir PSU EA2 - FU3 (facing back side remove the lower right cover the board in the middle) and PSU G - FU2 (facing the back side the board at right underneath of AC Driver Board you can see this boards after you swing the lower right window) both 4A but be more extra carefull when removing this board bracket some connector dont have slack.

but still its a best to have a trained ricoh engineer look it for you Sir, Good Luck
but still it

thank you very much i checked both fuses and replaced both awaiting to hopefully hear from a tech i called to check harness cables and switches
greatly appreciate everyones help on this matter

[aawwad]

Re: Ricoh Pro c720

Hello..
my name is Ayman, I'm interested in buying Ricoh Pro C720. Is there any difference between this machine and Pro C900 other than the speed?

[jc1print]

Re: Ricoh Pro c720

[QUOTE=imaginemoko;447535] try to check Sir PSU EA2 - FU3 (facing back side remove the lower right cover the board in the middle) and PSU G - FU2 (facing the back side the board at right underneath of AC Driver Board you can see this boards after you swing the lower right window) both 4A but be more extra carefull when removing this board bracket some connector dont have slack.

but still its a best to have a trained ricoh engineer look it for you Sir, Good Luck
but still it[/QUOTE

question on that board there is a light next to the fuse is that suppose to be on when the machine is turned on?
and can u tell me where are the sensors to this machine for the doors?

[jc1print]

Re: Ricoh Pro c720

try to check Sir PSU EA2 - FU3 (facing back side remove the lower right cover the board in the middle) and PSU G - FU2 (facing the back side the board at right underneath of AC Driver Board you can see this boards after you swing the lower right window) both 4A but be more extra carefull when removing this board bracket some connector dont have slack.

but still its a best to have a trained ricoh engineer look it for you Sir, Good Luck
but still it

power supply was bad really appreciate it now its just slow booting up hopefully i can get tech to come and tune it up!!!

[Imprestik]

Re: Ricoh Pro c720

Going off your picture there bud, do you have any finishing options or a large capacity tray?

If you do, the image you posted is only showing a base device.

I hope your under a service agreement because its going to get very expensive for you.....