ricoh c2550

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • ariosz17
    Junior Member
    • May 2016
    • 8
    #16
    Re: ricoh c2550

    Originally posted by TonerMunkeh
    Can you print a config page and scan it here? Are you trying to get a connection via DHCP or static? Which board got toasted?
    I can but a little later. Both and nothing on either. Controller board.

      Comment

      • ariosz17
        Junior Member
        • May 2016
        • 8
        #17
        Re: ricoh c2550

        Originally posted by wyo19
        If you have a 4 or more port switch try that, wall to switch, switch to copier....
        Oh did but it was still a no go.

          Comment

          • blee
            Technician

            Site Contributor
            50+ Posts
            • Jan 2009
            • 51
            #18
            Re: ricoh c2550

            Make sure your NIC card is enabled in SP mode. I believe it is SP 5-985.

              Comment

              • wyo19
                Technician
                • Nov 2012
                • 51
                #19
                Re: ricoh c2550

                Originally posted by ariosz17
                Oh did but it was still a no go.

                Did you connect your laptop to the switch first? make sure you have a complete network, if the board that was fried was it the controller board, if so where did you get the new one from? Ricoh or HYTEC? Can you web into the copier?

                  Comment

                  Previous 1 2 template Next
                  Working...