sc672 on a MP 6500 when adding postscript option??

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fshead
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2356
    #1

    sc672 on a MP 6500 when adding postscript option??

    hi
    i bought a used ps3 type 7500 on..by and upon installing it"top slot" and left the print/scan card in bottom,i get
    a 672 code.
    i tried it a few times wth no luck..
    i will try it in another machine next week but figured id ck here to see if anyone has seen this before..
    barring it being a defective card
    as i remember all firmware was up to date
    thnx
    Tags: None
    • ruben
      The New Guy

      1,000+ Posts
      • Oct 2012
      • 1203
      #2
      Re: sc672 on a MP 6500 when adding postscript option??

      Make sure you follow 1.22.2 in the Service Manual, if the card is not inserted correctly you could have a bent or damaged contact.

        Comment

        • fshead
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2356
          #3
          Re: sc672 on a MP 6500 when adding postscript option??

          Originally posted by ruben
          Make sure you follow 1.22.2 in the Service Manual, if the card is not inserted correctly you could have a bent or damaged contact.
          thnx.
          i have the ps3 in the 1 slot and after ckin it on my laptop i see it shows prnt n scan that
          has me believing it was a merged pull from another copier.
          i was cking the card for the zoffer files that cause the panel message to come up"card was already installed..
          what complicates it more is i have a 2nd card on the 2 slot that i cant read and
          have no idea if it was a ps3,encryption card or something else.
          i didnt have my laptop to ck it in the computer.

            Comment

            • anothertech
              Service Manager

              Site Contributor
              1,000+ Posts
              • Nov 2007
              • 1756
              #4
              Re: sc672 on a MP 6500 when adding postscript option??

              The service manual says, slot 1=System Card slot 2=option card(in this case, PS3 card) slot 3=service

              if you have more that one option, then you must merge other options to the PS3 card.

                Comment

                • Tehno copy
                  Junior Member
                  • Jan 2015
                  • 3
                  #5
                  Re: sc672 on a MP 6500 when adding postscript option??

                  Try to put PS card in service slot, that may solve your problem...

                    Comment

                    • fshead
                      Service Manager

                      1,000+ Posts
                      • Jan 2009
                      • 2356
                      #6
                      Re: sc672 on a MP 6500 when adding postscript option??

                      Originally posted by anothertech
                      The service manual says, slot 1=System Card slot 2=option card(in this case, PS3 card) slot 3=service

                      if you have more that one option, then you must merge other options to the PS3 card.
                      if i remember right there are 2 slots only,and the ps3 card card must be in the top slot after merge the print scan card can be removed from slot 2..slot 2 is also used for firmware updates

                        Comment

                        Previous template Next
                        Working...