mpc6502 west toner bottle

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • en.
    Trusted Tech
    • Jul 2014
    • 124

    #1

    mpc6502 west toner bottle

    hi sir

    i have mpc6502 its working properly but west toner is full quickly and i clean it then its full again

    any one give any advice for this
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 8121

    #2
    Re: mpc6502 west toner bottle

    How fast does the waste bottle fill up, how many prints/copies?
    And how much toner does the machine use? Are you printing lots of full colour etc?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk

    Comment

    • anothertech
      Service Manager

      Site Contributor
      1,000+ Posts
      • Nov 2007
      • 1757

      #3
      Re: mpc6502 west toner bottle

      This is normal, they fill very fast. Keep a few spare containers on site for the customer to swap out.

      Comment

      • Zaxxon
        Senior Tech

        500+ Posts
        • Jan 2014
        • 608

        #4
        Re: mpc6502 west toner bottle

        Originally posted by en.
        hi sir

        i have mpc6502 its working properly but west toner is full quickly and i clean it then its full again

        any one give any advice for this
        I have some running 10-12k on a wastebottle, these guys eats alot of toner as well.
        Please start you post with brand, model, problem.

        Comment

        • copier tech
          Field Supervisor

          5,000+ Posts
          • Jan 2014
          • 8121

          #5
          Re: mpc6502 west toner bottle

          I guess this is because they overtone so badly, 10% of the toner is printed on the paper, the the rest of the toner either builds up on the botton of the dv unit or gets removed & put into the waste bottle!
          Awfull machine.
          Let us eat, drink, and be merry, because tomorrow we may die!

          For all your firmware & service manual needs please visit us at:

          www.copierfirmware.co.uk - www.printerfirmware.co.uk

          Comment

          • anothertech
            Service Manager

            Site Contributor
            1,000+ Posts
            • Nov 2007
            • 1757

            #6
            Re: mpc6502 west toner bottle

            It's better than what we had with the MPC6501 that dumps toner all over the place. At least this machine moves it to the waste bottle. Now, if we could just get those 6501's out of the field we'd have a lot less work to do.

            Comment

            • Tonerbomb
              AutoMajical Resolutionist

              Site Contributor
              2,500+ Posts
              • Feb 2005
              • 2589

              #7
              Re: mpc6502 west toner bottle

              This happens on the pro 5100/5110 also. It has alot to do with placement of the machine. These aren't supposed to be the 1 or 2 page office printers, they need to be used for the higher # of pages per job runs. As the typical office printer/copier they fill the WTB quickly, as a production machine they will not fill the WTB so quickly.......... place a spare WTB with every machine.......
              Mystic Crystal Revelations

              Comment

              • anothertech
                Service Manager

                Site Contributor
                1,000+ Posts
                • Nov 2007
                • 1757

                #8
                Re: mpc6502 west toner bottle

                Yes I agree with that. If they need an office MFP, the MPC6003 is a great machine. We replaced a few MPC6000 dogs with MPC6003's, now we hardly ever get calls in those accounts.

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37057

                  #9
                  Re: mpc6502 west toner bottle

                  Originally posted by Zaxxon
                  I have some running 10-12k on a wastebottle, these guys eats alot of toner as well.
                  Originally posted by copier tech
                  I guess this is because they overtone so badly, 10% of the toner is printed on the paper, the the rest of the toner either builds up on the botton of the dv unit or gets removed & put into the waste bottle!
                  Awfull machine.

                  Comment

                  • copier tech
                    Field Supervisor

                    5,000+ Posts
                    • Jan 2014
                    • 8121

                    #10
                    Re: mpc6502 west toner bottle

                    Yes I was thinking of the 6501
                    Let us eat, drink, and be merry, because tomorrow we may die!

                    For all your firmware & service manual needs please visit us at:

                    www.copierfirmware.co.uk - www.printerfirmware.co.uk

                    Comment

                    Working...