MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • rsyarcia
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Good JOb

    Leave a comment:


  • fabiomurinocamargo
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by rsyarcia
    We have this issue before, it was intermittent error. We replaced the development unit, toner hopper, D1495174 - PCB:TCB, toner cartridge, springs(Tech Bul) and updated the firmwares
    but the error still appears after some time. What we did is manually initialized the td sensor - SP 3030. Machine now ok. I cant see any RFID on the machine.
    I did everything that was indicated, but only the manual initialization TD (SP3030) that solved the problem. Thanks for the solution!

    Leave a comment:


  • rsyarcia
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    We have this issue before, it was intermittent error. We replaced the development unit, toner hopper, D1495174 - PCB:TCB, toner cartridge, springs(Tech Bul) and updated the firmwares
    but the error still appears after some time. What we did is manually initialized the td sensor - SP 3030. Machine now ok. I cant see any RFID on the machine.
    Last edited by rsyarcia; 10-08-2017, 05:23 PM.

    Leave a comment:


  • knarfdnul
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by DDlan
    U copy link.pl.
    thanks.
    I do not have a link and the word file is 1,5MB and I cannot put it here when it is above 1MB - send mail to copytecserviceafdeling@gmail.com and I will mail file to you

    Leave a comment:


  • DDlan
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by bob marley
    I had the same problem a week ago , because the RFID board. was defective
    U copy link.pl.
    thanks.

    Leave a comment:


  • knarfdnul
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by copier tech
    Thanks for this info, had this exact issue today toner bottle was popping out & opening the front door very odd!
    There is a new bulletin for this - a spring in another form in the function, that turns the toner bottles.

    Leave a comment:


  • copier tech
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by myxer1234
    Check the tech bulletin for this issue. It involves a new kind of tension spring for holding the toner bottle
    Thanks for this info, had this exact issue today toner bottle was popping out & opening the front door very odd!

    Leave a comment:


  • bob marley
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    I had the same problem a week ago , because the RFID board. was defective

    Leave a comment:


  • myxer1234
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    SC 681.pdfCheck the tech bulletin for this issue. It involves a new kind of tension spring for holding the toner bottle

    Leave a comment:


  • sharpmind
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Originally posted by sabah_karim
    Dear All

    MPC 4503 while printing solid full of colour duplex specially. While displaying functional error automatically re-starting with add toner magenta sign and sc registering sc 681-12.

    1. Firmaware updated. 2. Cleaned all four toner chip I.d very properly.
    3. Swap chip I.d magenta with yellow 4. Magenta toner replaced.
    5. Magenta PCDU replaced.

    problem remains same. Please updated with expert advice.

    Thanks You.
    Make sure that the pins that touch the RFID chip of the toner bottle are not bent. I have encountered that kind of problem. I have found out that one of the pins is bent and it is not touching properly the RFID chip.

    Leave a comment:


  • Imprestik
    replied
    Re: MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    There is a firmware fix for this SC, I suggest you begin by updating the firmware.

    If that does not fix it the rubber transport auger many have flipped out of the toner hopper.

    Its a messy job but I have seen this a lot on this device

    Leave a comment:


  • MPC 4503 while solid full colour auto re-starting add magenta sc 681-12

    Dear All

    MPC 4503 while printing solid full of colour duplex specially. While displaying functional error automatically re-starting with add toner magenta sign and sc registering sc 681-12.

    1. Firmaware updated. 2. Cleaned all four toner chip I.d very properly.
    3. Swap chip I.d magenta with yellow 4. Magenta toner replaced.
    5. Magenta PCDU replaced.

    problem remains same. Please updated with expert advice.

    Thanks You.
    Last edited by sabah_karim; 05-06-2015, 06:38 PM.
Working...