MPC5502A second side all Black

[Iowatech]

Re: MPC5502A second side all Black

I would like to say again that it might be important to double check the connections between the document feeder and the IOB board, as I had to deal with a problem very similar to this recently on a different line of machines and that's how I solved it.
In my case, the connection that powered the light source for the CIS wasn't fully seated. And it was my fault that was causing the problem, too. D'oh!

[digicor]

Re: MPC5502A second side all Black

Hello,

Print SMC DATA SP 5990-6, check SP 4-712, 4-713, 4-714, if the result is 0 input the default value of the SMC sheet

Its not there, there is no 4-712,13,14 in the print out 5990-6,
even in sp143
can someone help me get this duplex second side to work, ill check the connections again

[Cipher]

Re: MPC5502A second side all Black

Your not going to get the information you need from the machine as the SP values for the CIS ass'y are missing, normally wiped out with an memory all clear.

You require the factory supplied SMC sheet which is normally folded away on the inside of the front door.

[JonManchester]

Re: MPC5502A second side all Black

CALL RICOH TECH SUPPORT, they fixed the same exact issue you are having on our machine.

[digicor]

Re: MPC5502A second side all Black

Thank you thank you thank you
the smc sheet under the front door DID have the values!! and It worked!!! Thanks to all who responded
The default value on my machine were
4-712=3666
4-713-3741
4-714- 4082
In case some else needs a starting point