If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Help has anyone had this code from start up cannot get into service mode have also tried powering machine on without HDD. I have heard to look at controller.
Service manual says Controller PCB, and I would concur with that. Check the easy things first by swapping the RAM DIMMs from another machine and checking all of the connectors are good. Bent pins in the wiring harnesses are common.
* Controller board installed incorrectly or defective
* Operation panel connector loose or defective
* The controller is not completely shutdown when you turn the main switch off
Live for yourself and you will live in vain. Live for others, and you will live again
Comment