Samsung CLP-350N Firmware Issue my Stupid Fault.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • degrosha
    #1

    [Dead] Samsung CLP-350N Firmware Issue my Stupid Fault.

    Good Afternoon all,

    I was hoping that someone could help me out with reflashing my Firmware on my Samsung CLP-350N Colour Printer. I have stupidly attempted to flash the firmware on the Printer as the firmware was not designated for this particular batch (post March 2008). The computer (Win 7/64Bit) is now unable to see the printer at all even when connected via ethernet or USB. I have attached a youtube link (below) with the light sequence hoping that someone can assist me.



    Cheers
    Shane
    Tags: assist, batch, clp-350n, color, controller, failed firmware, firmware, issue, light, printer, samsung, usb
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      In my experience with loading the wrong firmware, unfortunately there is only one solution.
      Replace the PBA Main controller. I've only done it on two separate occasions, but it always ends the same. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


          Paul@justmanuals.com

          This is what happens when non professionals try to 'fix' something themselves.

            Comment

            Previous template Next
            Working...