Sharp AR C150 - Error H5-01 -

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sharpcopy2000
    • May 2025
    #1

    Sharp AR C150 - Error H5-01 -

    Hi,
    i have a problem with my Sharp AR-C150.
    In the fusing unit was 3 or 4 times a paperjam.
    Now i can not copie and there is a error " H5-01 ".
    Please help me.

    Thanks.
    Tags: c150, ect, error, error message, fusing unit, h501, interrupt, paperjam, pressed, sharp, sharp ar, shee
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      From the service manual:
      POD/DPID do not detect 3 sheets of paper continuously. Check the installation of the fusing unit.

      HtH
      Paul@justmanuals.com

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22937
          #3
          You've defined it perfectly. 4 jams then H5-01, which means you've had four jams in the fuser.

          To clear the error code: Remove undiscovered paper jams from fuser pawl area (left door). P > interrupt > C > interrupt > 14 > Start > Execute > CA

          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • Sharpcopy2000
              #4
              Further H05-01

              Hello
              thank you for the tip.
              I tried it.
              First i pressed "P",
              then i pressed "C",
              then I pressed "14",
              then I pressed "Copy",
              in the end i pressed "CA".
              Unfortunately the error message does not leave. Every time I press a key i receive a key-beep.
              Do I make which wrongly?
              The jamming of printer paper is completely away.

              Thank you very much
              Elke.

                Comment

                • spotlifter
                  Technician

                  50+ Posts
                  • Mar 2008
                  • 65
                  #5
                  Are you sure you follows blackcat instruction correctly?
                  Originally posted by blackcat4866
                  To clear the error code: Remove undiscovered paper jams from fuser pawl area (left door). P > interrupt > C > interrupt > 14 > Start > Execute > CA
                  He said "P" --> "Interupt" key --> "C" --> "Interupt" key --> 14 --> "Start/Copy" --> "Execute" --> "CA"
                  sigpic

                    Comment

                    • Sharpcopy2000
                      #6
                      Many thanks

                      I would like to thank.
                      It has functioned.
                      M a n y t h a n k s for the help.

                        Comment

                        Previous template Next
                        Working...