I can enter service mode, but I forget the service code for ATDC, can anyone help? thanks>
-
-
It's generally 25-2, but I believe this is the same as the AR-153, you don't need to set the DV on this model. -
thanks Tony, 25:2 does nothing, 25:1 will run the develp unit, I believe this is a fused unit, so I guess there is no way to overide it, it is working normally with just replacing the developer.Comment
-
tmaged is correct. There is no need to stir on an AR-153. You can agitate using 25-1, but no value is stored, it's preset on the controller. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment