MX-3110N Faded Prints, Copies Good

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mioduz
    Technician
    • Oct 2020
    • 34

    #61
    Re: MX-3110N Faded Prints, Copies Good

    Can I offer a reward????

    I'd be willing to offer a reward to any individual that can solve this issue, as well as a contribution to the site. Is that allowed??

    Comment

    • mansart
      Senior Tech

      Site Contributor
      500+ Posts
      • Apr 2009
      • 852

      #62
      Re: MX-3110N Faded Prints, Copies Good

      SIM 64-1
      set the following

      A:1
      B:100
      C:200


      Select C M Y in bottom left of touch screen, and Execute


      As near as I can determine this should print a grid pattern, one for each color.

      If these colors look good then you have a MFP board problem. This print pattern is generated directly from the LSU control board

      Comment

      • mioduz
        Technician
        • Oct 2020
        • 34

        #63
        Re: MX-3110N Faded Prints, Copies Good

        Originally posted by mansart
        SIM 64-1
        set the following

        A:1
        B:100
        C:200


        Select C M Y in bottom left of touch screen, and Execute


        As near as I can determine this should print a grid pattern, one for each color.

        If these colors look good then you have a MFP board problem. This print pattern is generated directly from the LSU control board
        Selecting cmy execute -> black grid
        C execute yields cyan grid
        M, Y individually each yield a corresponding grid

        All grids appear to be bright and full color

        Comment

        • mloudy
          Senior Tech

          500+ Posts
          • Oct 2015
          • 775

          #64
          Re: MX-3110N Faded Prints, Copies Good

          We had something similar to this on a mono Sharp and tried just about everything. Sharp advised us to replace the SD card and HDD as a set. Do not use a copy of the SD card that is installed in it now. Either use a new Sharp provided SD card or get a copy from someone and write it to a new Sandisk. This took care of the problem for us.

          Comment

          • mioduz
            Technician
            • Oct 2020
            • 34

            #65
            Re: MX-3110N Faded Prints, Copies Good

            mansart got be up and running again

            He came to the conclusion that the problem was isolated to the MFP board. He went above and beyond finding sources for replacements/repair

            BUT

            He also insisted that I try a known good SD card file that he sent me before dumping money into parts

            I am glad I listened becuase I am back up and running and printing like its new again.

            Everyones help here is greatly appreciated. I obviosly could not have done it without you

            Comment

            • copiertec
              Service Manager

              Site Contributor
              1,000+ Posts
              • Jan 2016
              • 2191

              #66
              Re: MX-3110N Faded Prints, Copies Good

              Originally posted by mioduz
              Can I offer a reward????

              I'd be willing to offer a reward to any individual that can solve this issue, as well as a contribution to the site. Is that allowed??
              I hope you live up to your word.

              Comment

              • mansart
                Senior Tech

                Site Contributor
                500+ Posts
                • Apr 2009
                • 852

                #67
                Re: MX-3110N Faded Prints, Copies Good

                Donate to the site.....

                Beating another copier into submission is reward enough for me....

                Comment

                • BillyCarpenter
                  Field Supervisor

                  Site Contributor
                  VIP Subscriber
                  10,000+ Posts
                  • Aug 2020
                  • 16308

                  #68
                  Re: MX-3110N Faded Prints, Copies Good

                  Originally posted by mansart
                  Donate to the site.....

                  Beating another copier into submission is reward enough for me....

                  You're a stand-up guy. Congrats on your victory.
                  Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                  Comment

                  • mioduz
                    Technician
                    • Oct 2020
                    • 34

                    #69
                    Re: MX-3110N Faded Prints, Copies Good

                    Originally posted by BillyCarpenter
                    You're a stand-up guy. Congrats on your victory.

                    Trying to donate to site. having some technical issues. I created a thread in the site feedback
                    (my paypal account is banned long story short)

                    Comment

                    • copiertec
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Jan 2016
                      • 2191

                      #70
                      Re: MX-3110N Faded Prints, Copies Good

                      Originally posted by mioduz
                      Trying to donate to site. having some technical issues. I created a thread in the site feedback
                      (my paypal account is banned long story short)
                      Then why did you offer too make a donation? This site accepts credit cards as well. Your issue is resolved...now you have a case of "alligator arms."

                      Comment

                      • BillyCarpenter
                        Field Supervisor

                        Site Contributor
                        VIP Subscriber
                        10,000+ Posts
                        • Aug 2020
                        • 16308

                        #71
                        Re: MX-3110N Faded Prints, Copies Good

                        Originally posted by mioduz
                        Trying to donate to site. having some technical issues. I created a thread in the site feedback
                        (my paypal account is banned long story short)
                        I read the other thread. You said Paypal froze all of your credit cards. Dude, they don't have the power to do that. That would be against the law.
                        Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                        Comment

                        • mioduz
                          Technician
                          • Oct 2020
                          • 34

                          #72
                          Re: MX-3110N Faded Prints, Copies Good

                          Originally posted by BillyCarpenter
                          I read the other thread. You said Paypal froze all of your credit cards. Dude, they don't have the power to do that. That would be against the law.


                          No they have froze my PayPal account(s). Since my credit cards and bank accounts are linked to a frozen account, when using PayPal checkout (even without logging in) they associate the credit card with my frozen account and do not allow the charge.

                          Comment

                          • mioduz
                            Technician
                            • Oct 2020
                            • 34

                            #73
                            Re: MX-3110N Faded Prints, Copies Good

                            Originally posted by copiertec
                            Then why did you offer too make a donation? This site accepts credit cards as well. Your issue is resolved...now you have a case of "alligator arms."

                            As stated in the other thread this forum accepts cc through PayPal as the merchant processor. My PayPal accounts and all associated credit cards/bank accounts are flagged by PayPal and will not allow the charge. I have offered to pay the individual who solved the issue in other means which he declined. I am sending him some of the product I make as a thank you though

                            Further more if I was trying to welch on my deal why would I have made a post asking for assistance in contributing or offered to may the individual in other forms

                            Comment

                            • BillyCarpenter
                              Field Supervisor

                              Site Contributor
                              VIP Subscriber
                              10,000+ Posts
                              • Aug 2020
                              • 16308

                              #74
                              Re: MX-3110N Faded Prints, Copies Good

                              Originally posted by mioduz
                              As stated in the other thread this forum accepts cc through PayPal as the merchant processor. My PayPal accounts and all associated credit cards/bank accounts are flagged by PayPal and will not allow the charge. I have offered to pay the individual who solved the issue in other means which he declined. I am sending him some of the product I make as a thank you though

                              Further more if I was trying to welch on my deal why would I have made a post asking for assistance in contributing or offered to may the individual in other forms

                              Here's what you do. Go to Walmart and get a Greendot money card. Put some money on it and then you can use it. Problem solved.
                              Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                              Comment

                              • copiertec
                                Service Manager

                                Site Contributor
                                1,000+ Posts
                                • Jan 2016
                                • 2191

                                #75
                                Re: MX-3110N Faded Prints, Copies Good

                                Your problem is fixed with your copier, thanks to all the contributors and trained techs who took the time to help you, including mansart. I hope when you get your finances unfrozen, you show your appreciation by contributing to the site like you said you would.

                                Comment

                                Working...