MX-M's with H5-01's

[ihatefinishers13]

At this point I believe sharp be stealing tips from here, some one had mention a while back about adding washers.

Good, maybe they'll finally see that their fusers and inner finishers are highly over-engineered garbage.

[Toner Boy]

I've been convinced for a while that the male fuser connector doesn't fully engage the female side in the machine, causing intermittent loss of thermistor detection AND paper sensor detection since H-codes as well as ghost jams seem to be dual-symptoms in some units. Not a sensor or thermistor issue at all, in my opinion.