When you use the adf, [ ck spf/rspf and press start ] is displayed on screen . rollers never come down and there is no jam indication on copier just message displayed when you remove the paper from the adf copier is back to normal.copier prints and copies fine as long you dont use adf. I did service mode test of adf and it works fine. Tried service trouble clear and still the same problem, Has anyone run into this... Thanks for help
Ar- 157e spf/rspf
Collapse
X
-
Do a search
I've answered this before on here. Clean the optics. The scanner looks for the two black lines on the white plate to tell it the adf is closed. If the optics are dirty, you'll get this message. Also don't clean the lines with alcohol, you'll remove them. -
Damn! I wish I could remember the details of this.
Run simulation 63-01. It has something to do with the white lever reference value. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment