MX-FN27N connection harness.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansen88
    Service Manager

    Site Contributor
    1,000+ Posts
    • Dec 2009
    • 1046
    #1

    MX-FN27N connection harness.

    Hello, I have a FN27n on a 4071 that the connection cable got damaged when machine was moved. I cant seen to find a part number for the cable in the part book. Maybe I am blind. Does anyone know what the cable number might be? Thanks for any help.
    Tags: None
    • Doug.P
      Technician
      • Aug 2015
      • 37
      #2
      I think this is the right cable 0CW4M560590// BH GX N C CABLE_PRINTER_IF_S

        Comment

        • Hansen88
          Service Manager

          Site Contributor
          1,000+ Posts
          • Dec 2009
          • 1046
          #3
          Originally posted by Doug.P
          I think this is the right cable 0CW4M560590// BH GX N C CABLE_PRINTER_IF_S
          Not sure if that one is it. It shows more connectors on it than it is supposed to. One end has one connector and a ground wire, the other end that plugs into the machine has two connectors

            Comment

            • Doug.P
              Technician
              • Aug 2015
              • 37
              #4
              Originally posted by Hansen88

              Not sure if that one is it. It shows more connectors on it than it is supposed to. One end has one connector and a ground wire, the other end that plugs into the machine has two connectors
              That's the only that shows that is the printer interface cable.

                Comment

                • Doug.P
                  Technician
                  • Aug 2015
                  • 37
                  #5
                  Originally posted by hansen88

                  not sure if that one is it. It shows more connectors on it than it is supposed to. One end has one connector and a ground wire, the other end that plugs into the machine has two connectors
                  i also found this bulletin
                  Attached Files

                    Comment

                    • Hansen88
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Dec 2009
                      • 1046
                      #6
                      Originally posted by Doug.P

                      That's the only that shows that is the printer interface cable.
                      Thanks. I ordered that one and the only one that shows the correct amount of connectors on it. Hope one of these two works.

                        Comment

                        • Hansen88
                          Service Manager

                          Site Contributor
                          1,000+ Posts
                          • Dec 2009
                          • 1046
                          #7
                          Originally posted by Doug.P
                          I think this is the right cable 0CW4M560590// BH GX N C CABLE_PRINTER_IF_S
                          You were right. The number is updated to 0cw4m56059002 I ordered and it came in as this number and id correct harness. Thanks a lot.

                            Comment

                            Previous template Next
                            Working...