Doug.P
Doug.P
Technician
Last Activity: 2 days ago
Joined: 08-31-2015
Location: San Angelo,TX
-
You will also need the watermark firmware if the HDD was replaced.... -
In our experience when this happens we just bite the bullet and replace the whole stapler assembly.Leave a comment:
-
You will have to Go to Sharp IDNC Service website and follow the procedure to reset the Admin Password there is no dip switch reset on newer machines...Leave a comment:
-
The router probably has that port blocked or reserved.Leave a comment:
-
i also found this bulletin...Leave a comment:
-
That's the only that shows that is the printer interface cable....Leave a comment:
-
I think this is the right cable 0CW4M560590// BH GX N C CABLE_PRINTER_IF_SLeave a comment:
No activity results to display
Leave a comment: