If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If possible can i get a copy of this firmware. The version have i have (ver02.10.o1) does not support TLS ver 1.2 and as a result i am unable to scan to email with Office 365.
If possible can i get a copy of this firmware. The version have i have (ver02.10.o1) does not support TLS ver 1.2 and as a result i am unable to scan to email with Office 365.
Hello,
i placed it on a flash and tried to update but the message on the MFP is saying to enter a flash with the firmware.
the flash is formatted in fat32 and the file is in the root of the flash with nothing else on it. What could be the issue?
I also tried another flash.
Hello,
i placed it on a flash and tried to update but the message on the MFP is saying to enter a flash with the firmware.
the flash is formatted in fat32 and the file is in the root of the flash with nothing else on it. What could be the issue?
I also tried another flash.
Did you try the other USB port?
"You can't trust your eyes, if your mind is out of focus"--
What size flash drive? Gotta be less than 32GB more than likely. You can also go to the service webpage(not the normal webpage), by going to https://IPADDRESS/service_login.html with the password of service. And update it that way.
Comment