Worked on 5316 last day with clear band 2 3 times on an A4 copy changed Drum and it simes like good after a view days same thing does anybody know wath it is?checked also for broken tears and gears nothing found ad else please help Thanks alot
-
-
You might take a look at the developing drive. Gears ground down or spun on a "D" shaft, or maybe a seizing developing cylinder. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Sharp 5316
The Circoferenze is from Drum and i changed it and it works fine four a couple days.My question can it be a thermical problem? Fans not Work It looks like the Developerbrush alterate the surface of the drum.
Thank you for respons!Comment
-
fix the cleaning blade of your Drum bro..or the opc drum may have a scratches along its side (white )..put remedy on it.Comment
-
sharp 5316
There is no scratch on the Drum and the cleaning blade works fine also
Please find other solutions Thanks at allComment
-
try change the transfer charger.it could be sometime.
are you sure there are no spoilt of all the drive gear at the back?
better double check it....Comment
Comment