Sharp AR-M208 - Machine Locked In Warm Up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tech2002
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2008
    • 334

    #1

    Sharp AR-M208 - Machine Locked In Warm Up

    Got a M208 that I just got through changing the Fuser (brand new) had a issue with one of the delivery sections - good now.

    Was running system and everything working well when Toner Replenishment Light came on, twice, second time changed toner cartridge, this is when it went into Warm Up and will not come out.

    Turned system off then on again. Check my wiring - looks good.

    Any suggestions appreciated.

    Thanks!
  • Tech2002
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2008
    • 334

    #2
    Fixed issue.

    After about 15 mins in running in Warm Up Model, the machine finally showed an F2:02 Code - the DV Unit is bad. I swapped the bad one with a good one and Voila!!! It works!!!

    This came out of the blue - it just went bad, just like that.

    But, sometimes the simple things in life excite me.

    Comment

    • OMD-227

      #3
      But, sometimes the simple things in life excite me.
      Good to see a dude who is easily pleased.

      Comment

      • vincent64
        Trusted Tech

        250+ Posts
        • Feb 2008
        • 382

        #4
        I had a ARM 277 do this last week, what I found was the gear between the mag roller and stir augers had worn down, causing the code.
        Swapped the unit, problem went away, mine had 500K + on it.

        Comment

        • Tech2002
          Trusted Tech

          Site Contributor
          250+ Posts
          • Aug 2008
          • 334

          #5
          My system had about 350k.

          Comment

          Working...