Ar337 h3-01 error
I HAVE SHARP AR337 That take me error H3-01 & only right heater lamp is on & the left lamp didnot work when i make sim5-2 to test the heater lamp i change the heater unit & make sim14 & change the AC-power supply but the H3-01 is stell
-
-
Have you replaced the sub-thermistor? Have you checked the continuity of the thermostat? It may be open. If the thermostat is closed check the modular connector on the back of the fuser. They've been known to arc. If that's the case it will be obvious, from the black soot and melting plastic connector.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
i change the heater unit from working machineComment
Comment