sharp ARM450

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • adel_nagieb2000@yahoo.com
    Technician
    • Jun 2009
    • 14
    #1

    sharp ARM450

    someone help me
    sharp ARM450 work very good without use feeder
    when use feeder and after three or two paper . the machine is power off
    i must turn off the machine and power on
    to work and rebeet that error
    can someone help me
    thanks
    Tags: arm450, diagnose, rolle, sharp
    • conny
      #2
      has the machine printer installed?
      if so try and change to antoher printer controller

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22995
          #3
          If you were getting an error or jam code that might help us to diagnose this problem. From the information you've provided, I can only speculate. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • adel_nagieb2000@yahoo.com
              Technician
              • Jun 2009
              • 14
              #4
              Originally posted by conny
              has the machine printer installed?
              if so try and change to antoher printer controller
              The machine printer installed and working without problem

                Comment

                • lky1978
                  Trusted Tech

                  250+ Posts
                  • Mar 2009
                  • 482
                  #5
                  Originally posted by adel_nagieb2000@yahoo.com
                  someone help me
                  sharp ARM450 work very good without use feeder
                  when use feeder and after three or two paper . the machine is power off
                  i must turn off the machine and power on
                  to work and rebeet that error
                  can someone help me
                  thanks
                  maybe the feeder harness broken,difficult to change also.

                    Comment

                    • fireater
                      Repair God? not quite

                      250+ Posts
                      • Apr 2006
                      • 253
                      #6
                      um redescribe this to me. the machine shuts off? while using the feeder? or does it go into an error? does it work ok from the glass? or it goes into an error? if it shuts off i would start by looking at the harness to the feeder/ scanner. if its an error post the error code so we can help you.
                      I fix copiers ...Well Sorta

                        Comment

                        Previous template Next
                        Working...