Sharp AR-287 E7-07 error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22996

    #16
    It sounds like you got a bad HDD. You can try to format it, or try another one. There is a remote possibility that you're experiencing an ICU board problem, but the HDD is still the most likely. Have you checked the DC power to run the hard drive? Maybe you've got a bad power supply...

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • J_Lee
      Trusted Tech

      100+ Posts
      • Oct 2008
      • 111

      #17
      Optics?

      Could it be in the optics because it only does it when copying. When you print internally it doesn't do it? Also, it doesn't throw the error code anymore... only in the beggining???

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22996

        #18
        You may get a temporary reprieve, but eventually you'll end up changing a hard drive. Those codes don't just 'heal themselves'. No it's not optical.
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • J_Lee
          Trusted Tech

          100+ Posts
          • Oct 2008
          • 111

          #19
          FIXED!

          Turned out to be the scanner PWB. After months sittin in the shop.

          Comment

          Working...