ARM450 - How do you change the drum?

[sgpm]

I was able to remove the drum assembly from the machine but could not figure out how to get the drum out. The spring that holds it doesn't seem to compress enough to release it so I'm guessing there's some other way?

Thank you much for your help,
Greg

[tmaged]

The 3 gold screws on the front of the drum unit will pull the post out of the drum. You really should pick up a service manual. It has all that stuff in it.

[sgpm]

Tony,

Thank you very much, that did it. I do have the service manual but for some reason I could not find the information there.

Thanks again,
Greg

[Dark Helmet]

Don't forget to reset 24-11 when you change your drum. The drum rotation counter is reset there and that is what Process control uses.

I don't think there is any mention in the book to execute this either

[sgpm]

Did that already Lawrence, but thanks for the reminder.