It will go through the fuser. This series does not offer and add-on inserter like the ARM550 series does.
Bil
Difference between AR-D14, AR-D15 and AR-D27
Collapse
X
-
Thank you both for the replies. I'll order the ARD27 and see how it goes.
One more question for the IM4511/AR-M455. :-)
When inserting a pre-printed cover (color) does the cover sheet go through the fuser or through a separate path? Exit tray is that of the booklet finisher (FN7).
I tried this once with an AR-M450 (thought I manually added the printed cover in the same tray as the other sheets since the old tiger would not let you add a cover in booklet mode) and the result was well... not very pretty!
GregLeave a comment:
-
Mechanically they're the hard to distinguish. It's the boards that are different.Leave a comment:
-
If this post is correct:
http://www.copytechnet.com/forums/ot...cs-4511-a.html
Then you have an ARM355/455 series machine and need the ARD27 unit.
The ARD15 is for the ARM350/450 series. Couldn't tell you what the differences are.
Hope this is helpful.
Good luck.
BilLeave a comment:
-
Leave a comment: