Sharp AR-235 dumping dev

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • vlad_robas
    Trusted Tech
    100+ Posts
    • Oct 2006
    • 225
    #16
    This is BAD, Machine is continuuing to trow developer out. DV unit was replaced about 60k ago and was trowing dev out (oly less) back then.
    I will take to the customer another machine and take this PITA to our place to tear it apart....

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22995
        #17
        vlad,
        The maintenance cycle on that machine is only 75K. If you made it 60K I would call that a partial success. The AR-M208N came factory set to a 50K maintenance cycle.

        If your customer ran 60K in the last two weeks this machine is too small for that volume. You need a larger machine in this location. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • OMD-227
            #18
            Amen Brother!

              Comment

              • vlad_robas
                Trusted Tech
                100+ Posts
                • Oct 2006
                • 225
                #19
                Somwehere on the way we have a missunderstanding, it is easy with my english.

                The developer unit and then drum unit have been replaced about one year or maybe one year and a half ago (at the begining of 2009) since then they made about 60 k.

                Since i replaced those parts the copier didn't dump so much dev but only less.

                Now in this 2 - 3 week's since i did put the new part's they only have done about 2-3 k print's and is dumping dev and jaming becouse of that. Back then i did put a new charging corona.

                  Comment

                  Previous 1 2 template Next
                  Working...