ARC-260M double count

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hana_freak
    Technician
    • Oct 2008
    • 44
    #1

    ARC-260M double count

    Hi there,

    Anyone knows how to enable the double-count when a A3 copy is done.

    Antonio
    Tags: 100, 100%, 260m, arc, c226, click, codes, copy, count, diagnostics, double, enable, sharp, sim, workcentre, xerox
    • bilyahn
      Service Manager

      1,000+ Posts
      • Dec 2006
      • 1470
      #2
      It should be defaulted to double click but if not then sim 26-5.

      Good luck.

      Bil

        Comment

        • hana_freak
          Technician
          • Oct 2008
          • 44
          #3
          This will works with Xerox C226?

            Comment

            • bilyahn
              Service Manager

              1,000+ Posts
              • Dec 2006
              • 1470
              #4
              It says that they are the same machine so I don't see why not, But I have not seen a C226 so can not state that it is so 100%. If you can get into diagnostics the same way as a sharp then the sim codes should be the same. I know that the small workcentre that sharp makes for xerox work this way.

                Comment

                Previous template Next
                Working...