sharp ar-286 H5-01 error code HELP???

[blackcat4866]

I've got a life, and a good one.

I'm not the one looking to cheap my way into some free service.
Pay the tech. We go through a lot of training and experience to get where we're at, and we're worth it.

By the way, I've helped plenty of endusers like yourself that show some initiative, and read the manual. This isn't the public library. You do your own legwork.

Sorry. Professionals look up their own codes. I don't do it for other techs. RTFM.

Get a life.

[Akitu]

You can get your answers, and we're more than happy to give them, however I'd like to think most of us try to keep the SERVICE modes in the service industry, considering our employers (and in some unfortunate circumstances, the techs themselves) pay to get the manuals to learn how to get into the service modes and what all the service notifications mean.

[blackcat4866]

Sorry. Professionals look up their own codes. I don't do it for other techs. RTFM.

If you want to act like a service person you can start by purchasing a manual and reading it. That what us professionals do, a lot. When you figure out how to access simulation 22 you will be able to view jam codes. =^..^=

I guess this isn't a place to get answers then

[ZOOTECH]

P * C * 14 Then 1 For Yes And Follow On Screen Directions, Code Should Clear Out.

Jamie

For this model and all Cougars, to access TC it is P - Int - C - Int.

[blackcat4866]

If you want to act like a service person you can start by purchasing a manual and reading it. That what us professionals do, a lot. When you figure out how to access simulation 22 you will be able to view jam codes. =^..^=

[Akitu]

I would probably be too new to the copier game to have seen one, and from what I've seen of our lists, none of our customers have one.

Have you tried using the other tray? Seems like from what you are saying it is a paper feed issue out of the tray. Jam code would help a lot.

There is no jam code displayed. There is no paper jammed in the unit. In fact there is no paper in any of the trays.

[bilyahn]

Epic thread necro, 2007. +1

No, this comment was not meant to contribute anything, and I haven't seen an AR-286 ever.

I've seen 1 and we still have it in service.

[bilyahn]

I do not know what the tech replaced. It was over 1 year ago.

The only error code displayed is H5-01. There does not appear to be a paper jam anywhere in the unit.

Have you tried using the other tray? Seems like from what you are saying it is a paper feed issue out of the tray. Jam code would help a lot.

I do not know what the tech replaced. It was over 1 year ago.

The only error code displayed is H5-01. There does not appear to be a paper jam anywhere in the unit.

[Akitu]

Epic thread necro, 2007. +1

No, this comment was not meant to contribute anything, and I haven't seen an AR-286 ever.

[bilyahn]

What have you replaced to fix the original problem? What are the jam codes now?

It goes into error when I attempt double-sided copies only.

I had a tech out last year and it still failed. He thought it was an expensive fix to do double-sides.

I just need it now for single-sided copies.