Black copy on Sharp SD-3062

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackhat
    • May 2025
    #1

    Black copy on Sharp SD-3062

    Hello guyes,
    I need help on my 3062, i get always a black copy, i checked the drum its always black (the cleaner don t work i think)
    any one can help please ?
    Tags: black, coated, copy, exposure, help, help please, leave, one, sd3062, sharp, solid black
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22929
      #2
      Does the exposure lamp come on when scanning?
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • blackhat
          #3
          Hi
          the exposure lamp is working proprely

            Comment

            • Sam Tofu
              Trusted Tech

              Site Contributor
              100+ Posts
              • Dec 2007
              • 130
              #4
              By black do you mean solid black. Light black?
              Is it more like a sky shot? or what?
              Few items to check.
              1. It is easy to leave the drum blade "hooked" up therefore not cleaning.

              2. Is the charge being "held" on the drum therefore not allowing cleaning? If this is the case the toner will be more like it is "sticking" to the drum.

                Comment

                • Copier Systems
                  #5
                  Sharp-3062

                  Ck-46-1 settings
                  Do exposure cal
                  Ck-sim-44-2 44-3
                  AndyH

                    Comment

                    • Copier Systems
                      #6
                      sHARP-3062

                      iF THE DRUM IS COATED ON POWER UP YOU ARE WORKING WITH A DRUM GROUND PROBLEM.
                      AndyH

                        Comment

                        Previous template Next
                        Working...