AR286 with code f2-31 after adding Toner...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • postalguy
    #1

    AR286 with code f2-31 after adding Toner...

    I could use a service manual for this machine also.

    Basically, it asked for toner so I gave it what it wanted, now its asking for a service with code F2-31.

    Can we remove this code, or did I screw something up? All help is appreciated.

    thanks guys...
    Tags: ar286, code, dumping toner, f231, tecnician, toner
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3374
      #2
      Your toner add roller is worn - dumping toner into developer. Replace foam roller and seals in toner hopper, should take care of trouble. You may have to replace developer and re-calibrate.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • mnm
          Technician
          • Jan 2008
          • 23
          #3
          I have the manual for this machine. I could email it to you however it's about 8.6MB

            Comment

            • postalguy
              #4
              Originally posted by mnm
              I have the manual for this machine. I could email it to you however it's about 8.6MB

              I have a gmail account that will take it I'm sure... I'd appreciate it.

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22927
                  #5
                  There's nothing I can add to the previous posts. Just wear your black shirt. Dumping the hopper can be messy.
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • JDE75
                      Technician
                      • Apr 2007
                      • 24
                      #6
                      You need to replace toner roller nrolp1211 and the seals. Then you should be okay. What I have noticed is the toner roller goes bad, it's a spogy roller and once you replace it you should be fine.

                        Comment

                        • DINGO
                          Senior Tech

                          500+ Posts
                          • Nov 2007
                          • 661
                          #7

                            Comment

                            Previous template Next
                            Working...