AR-SP6 trouble in black line

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Aungmyowai
    Junior Member
    • Oct 2012
    • 5
    #1

    AR-SP6 trouble in black line

    copy in black line at rear side when using ADU . copy from OC is good. all mirror and glasses are cleaned.anyone can help me
    Tags: None
    • Akitu
      Legendary Frost Spec Tech

      Site Contributor
      2,500+ Posts
      • Oct 2010
      • 2595
      #2
      Re: AR-SP6 trouble in black line

      Does it do it on internal prints as well? Could be a worn drum or charge grid.
      Cthulhu for president! Why settle for the lesser evil?

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22995
          #3
          Re: AR-SP6 trouble in black line

          Perhaps you might clean the slit glass. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • ZOOTECH
              Senior member of CRS

              Site Contributor
              2,500+ Posts
              • Jul 2007
              • 3375
              #4
              Re: AR-SP6 trouble in black line

              Originally posted by blackcat4866
              Perhaps you might clean the slit glass. =^..^=
              This is certainly the first place to look (slit glass); the optics have to be absolutely parallel because the scanner moves all the way to the right to read from the slit glass, and copy from the glass can look ok if slightly off parallel.
              I believe there was a firmware upgrade also for this problem, but I'm not positive.
              "You can't trust your eyes, if your mind is out of focus" --

                Comment

                • Akitu
                  Legendary Frost Spec Tech

                  Site Contributor
                  2,500+ Posts
                  • Oct 2010
                  • 2595
                  #5
                  Re: AR-SP6 trouble in black line

                  OP said glass was clean. Seems to be a tech as well.
                  Cthulhu for president! Why settle for the lesser evil?

                    Comment

                    • bilyahn
                      Service Manager

                      1,000+ Posts
                      • Dec 2006
                      • 1470
                      #6
                      Re: AR-SP6 trouble in black line

                      If it is at the very edge of the paper try adjusting sim 50-16 (SPF offcenter adjustment).

                      Good luck.

                      Bil

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22995
                          #7
                          Re: AR-SP6 trouble in black line

                          If I could count the number of times somebody told me the slit glass was clean, and it wasn't ... =^..^=
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • Akitu
                              Legendary Frost Spec Tech

                              Site Contributor
                              2,500+ Posts
                              • Oct 2010
                              • 2595
                              #8
                              Re: AR-SP6 trouble in black line

                              Originally posted by blackcat4866
                              If I could count the number of times somebody told me the slit glass was clean, and it wasn't ... =^..^=
                              I completely agree. Never trust an end user...
                              Cthulhu for president! Why settle for the lesser evil?

                                Comment

                                • JustManuals
                                  Field Supervisor

                                  5,000+ Posts
                                  • Jan 2006
                                  • 9838
                                  #9
                                  Re: AR-SP6 trouble in black line

                                  This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


                                  Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


                                  Paul@justmanuals.com

                                    Comment

                                    Previous template Next
                                    Working...