MX-M950 doesnt boot up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rolandito
    Technician
    • Aug 2007
    • 85
    #1

    MX-M950 doesnt boot up

    Hi Everyone
    The problem is when I turn on machine, the screen is blank...power light is on,,,but it doesnt appear sharp logo..
    I need your suggestions.
    Thanks
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22995
      #2
      Re: MX-M950 doesnt boot up

      What have you done so far Rolandito? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • ZOOTECH
          Senior member of CRS

          Site Contributor
          2,500+ Posts
          • Jul 2007
          • 3375
          #3
          Re: MX-M950 doesnt boot up

          Originally posted by blackcat4866
          What have you done so far Rolandito? =^..^=
          Ask for help.
          "You can't trust your eyes, if your mind is out of focus" --

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22995
              #4
              Re: MX-M950 doesnt boot up

              I was looking for something like: 1) opened my manual, 2) metered dc voltages on the power supply, 3) etc...

              ... but you're probably right. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Rolandito
                  Technician
                  • Aug 2007
                  • 85
                  #5
                  Re: MX-M950 doesnt boot up

                  Thanks black cat..
                  Yesterday the machine was fine.....with jamming problems...
                  When I opened front door the machine turned off..I opened rear of machine the printer control board is working
                  I will check dc power suplpy....

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22995
                      #6
                      Re: MX-M950 doesnt boot up

                      Originally posted by blackcat4866
                      I was looking for something like: 1) opened my manual, 2) metered dc voltages on the power supply, 3) etc...

                      ... but you're probably right. =^..^=
                      Don't forget the part about reading the manual (before asking for help). =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • mojorolla
                          The Wolf

                          2,500+ Posts
                          • Jan 2010
                          • 2583
                          #7
                          Re: MX-M950 doesnt boot up

                          This machine has more fuses than a fireworks factory!
                          fireworks.jpg
                          They are conveniently listed in the service manual.
                          Capture.JPG


                          Failing to plan is planning to fail!!!

                            Comment

                            • Bani
                              Technician
                              • Dec 2009
                              • 34
                              #8
                              Re: MX-M950 doesnt boot up

                              Had the same problem,
                              check the RAM, in my case it was a 256MB RAM left upper side of MFP Board.

                                Comment

                                • austonrush
                                  Sharp & HP Tech

                                  100+ Posts
                                  • Jan 2010
                                  • 234
                                  #9
                                  Re: MX-M950 doesnt boot up

                                  This is almost always a ram issue. When the power light is on but you have no screen 9 out of 10 times the ram is dead.

                                  good luck.

                                    Comment

                                    Previous template Next
                                    Working...