ARM350 with E7-02 error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • axyun
    Service Manager

    Site Contributor
    1,000+ Posts
    • Aug 2007
    • 1323
    #1

    ARM350 with E7-02 error

    Think LSU board might be bad.



    Does whole lasr unit have to be ordered. I tried to get part number off board and saw "N1455FCE1" so I assumed it was CPWBN1455FCE1 but got "invalid part number" at Sharp-Service.



    Any info is very much appreciated. Frank/ActionPhotocopy
    Tags: None
    • MHeon71
      Trusted Tech

      Site Contributor
      VIP Subscriber
      250+ Posts
      • Oct 2008
      • 487
      #2
      Re: ARM350 with E7-02 error

      I do not think you can just replace the laser PWB. I do not have that manual for the AR-M350, but the AR-M355 parts manual only gives you the option to purchase the polygon motor or the whole LSU.

        Comment

        • axyun
          Service Manager

          Site Contributor
          1,000+ Posts
          • Aug 2007
          • 1323
          #3
          Re: ARM350 with E7-02 error

          Thanks Mark.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22927
              #4
              Re: ARM350 with E7-02 error

              Originally posted by MHeon71
              I do not think you can just replace the laser PWB. I do not have that manual for the AR-M350, but the AR-M355 parts manual only gives you the option to purchase the polygon motor or the whole LSU.
              Ditto that. You can get the polygon mirror motor, but nothing else separately. There's a bulletin somewhere to that effect. It looks as though you'll have to splurge on the assembly. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • axyun
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Aug 2007
                  • 1323
                  #5
                  Re: ARM350 with E7-02 error

                  It could actually be PCU. I was hoping LSu as it was less expensive and when I saw part # on board I was hoping it was available separately. Time for a drink. Have a good weekend. Frank

                    Comment

                    Previous template Next
                    Working...