Sharp MX2314N Hanging Screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dazza
    Technician
    • Aug 2012
    • 15

    #1

    [Dead] Sharp MX2314N Hanging Screen

    Hi

    Has anyone had any issues with a Sharp MX2314N in which the screen just hangs on the Sharp Logo Screen my colleague is having this issue the machine doesn't have a Hard Drive just an SD Card he thought the issue may of been with the MFP board of which he changed and still gets the same problem.

    Any Ideas or any suggestions Welcome

    Thanks in Advance
  • glewisme
    Trusted Tech

    100+ Posts
    • Nov 2009
    • 240

    #2
    Re: Sharp MX2314N Hanging Screen

    I would try the SD card itself.

    Comment

    • Dazza
      Technician
      • Aug 2012
      • 15

      #3
      Re: Sharp MX2314N Hanging Screen

      I've seen a few posts of similar issues where people have changed the SD Card and it not work thanks for your input tho much appreciated

      Comment

      • faxman28
        Trusted Tech

        Site Contributor
        250+ Posts
        • Nov 2010
        • 436

        #4
        Re: Sharp MX2314N Hanging Screen

        check your service manual, if the mx2314 is similar to US model mx2615, on mfp board below heatsink there is an led if it is on and red that is supposed to indicate problem with sd card, also in troubleshooting section of manual it description of boot sequence leds on mfp board it may help. Also make sure write lock switch on SD card didn't get turned on . This will cause machine not to boot or throw error.

        Comment

        • Dazza
          Technician
          • Aug 2012
          • 15

          #5
          Re: Sharp MX2314N Hanging Screen

          Thanks a lot faxman this May help my colleague I shall pass this on once again really appreciate the feedback

          Comment

          Working...